LDG the single cone vacuum dryer Jiangsu Bohong Drying Company

Single cone vacuum dryer manufactured by Jiangsu Bohong is a single conical rotary tank, the tank in a vacuum state, to the jacket into the steam or hot water for heating, heat through the inner wall of the tank and the wet material contact. Single cone vacuum dryer is suitable for vacuum drying of powder and granular materials in pharmaceutical, food, chemical and other industries and mixing water vapor evaporated after heat absorption of wet materials. The water vapor evaporated after heat absorption of wet material is pumped away through vacuum pump and vacuum exhaust pipe. Because the tank is in a vacuum state, and the tank's rotation makes the material constantly up and down, inside and outside the flip, so it speeds up the drying speed of the material, improves the drying efficiency, and achieves the purpose of uniform drying.

Single-cone vacuum dryer has fast drying speed, generally it takes only a few seconds to ten seconds, with the characteristics of instant drying. The temperature of the liquid droplets in the drying process is relatively low, especially suitable for the drying of heat-sensitive materials, and can maintain the color, aroma and taste of the materials. In order to prevent the drying tower from sticking to the wall, this device is equipped with special structure, which can effectively prevent the products from sticking to the wall. The special air conveying system for finished products separates the dried products from the hot and humid air in the system in time, which avoids the possibility of moisture absorption or caking of the dried products.

First, the single cone vacuum dryer working principle

Through the screw belt rotation, the material in the container to form an axial flow circulation, around the part of the material upward flow and the center part of the material downward flow, thus generating a strong convection, shear, mixing and diffusion and continuous circulation, the formation of a full range of three-dimensional spatial movement, to achieve high efficiency of mixing effect.

Second, the single cone vacuum dryer structure features

1.The international advanced single cone screw belt stirring structure, high filling rate, up to 90%.

2. fully enclosed operating system, especially suitable for flammable and explosive, toxic or highly toxic, do not allow contamination or sterile requirements of food, biological products, pharmaceuticals and other materials mixing occasions.

3.the material all-round three-dimensional mixing movement, mixing effect is excellent, fast speed, can be suitable for viscous material mixing.

4.Compact equipment, internal mixing without dead angle, automatic discharge function, clean and thorough discharge, low labor intensity.

5.All parts in contact with materials are made of SUS316L, and the inner wall is polished to a mirror light below Ra0.4.

6.Advanced hygienic and aseptic single-end, mechanical seal with cleaning port device, completely avoiding external pollution of the powder.

7.Equipped with on-line cleaning, on-line sterilization and on-line drying functions, more in line with GMP and FDA clean production requirements.

Third,LDG Series Single Cone Vacuum Dryer--Application Scope

1.Category containing gold: gold salts, gold water, gold plating, gold wire, gold dregs, gold wire, edges, gold-plated pendants, hanging baskets, gold polishing ash, gold-plated waste liquid, etc.

2.Category containing silver: silver paste, solar energy silver paste, conductive silver paste, silver soldering electrodes, silver wipes, conductive silver paint, conductive fabrics, silver contacts, silver gel, silver paste, silver powder, silver water, silver line, silver, silver chloride, silver bromide, silver oxide, silver electrodes, shading solution, silver capacitors, etc. 3、Palladium category: palladium carbon, palladium oxide, palladium salts, palladium water, palladium powder, palladium tube, palladium catalyst, palladium sponge

3. Palladium category: palladium carbon, palladium oxide, palladium salt, palladium water, palladium powder, palladium tube, palladium catalyst, palladium carbon catalyst, palladium, palladium sponge,

4. Platinum category: waste platinum crucibles, platinum carbon catalysts, platinum-rhodium wires, platinum-rhodium thermocouples, platinum gold powder, platinum gold water, platinum carbon.

5.Rhodium category: rhodium water, rhodium powder, rhodium chloride, rhodium carbon, and all other precious metals containing gold, silver, platinum, palladium and rhodium.

6.Rubber isolating agent, rubber anti-frost agent, rubber defroster, rubber dispersant, rubber plastisol, rubber homogenizer, rubber activator.

7. antioxidant, rubber and plastic deodorant, flame retardant, antistatic agent, rubber and plastic toughening agent, plastic anti-fogging agent, plastic anti-shrinkage agent, rubber and plastic viscosity increasing agent, plastic compatibility agent, plastic transparent agent, rubber and plastic hardener, rubber and plastic anti-smoking agent, plastic opening agent, rubber and plastic anti-copper agent, rubber and plastic softener, rubber and plastic foaming agent, plastic defoamer, plastic desiccant, plastic cooling masterbatch, plastic expanding and dispersing agent, plastic mold releasing agent, plastic plasticizer. Plastic Plasticizers.